Getting Started
18
1
14. Selection keys
Correspond to items on the display. Press
to select the corresponding item.
15. Scroll keys
Press to select an item.
{U}:scrolls upward
{T}:scrolls downward
{V}:scrolls right
{W}:scrolls left
16. {User Tools/Counter} key
•User Tools
Press to change default or operation
parameters according to requirement.
•Counter
Press to check or print the counter value.
See “Accessing User Tools”, General
Settings Guide.
17. {Clear Modes} key
Press to clear the current settings.
18. {Clear/Stop} key
•Clear:
Clears an entered numeric value.
•Stop:
Stops a job in progress, such as scan-
ning, faxing, or printing.
19. Main power indicator
The main power indicator lights when
the main power switch is turned on.
If the operation switch's indicator is lit or
flashing, do not turn off the machine's
main power switch. Doing so might dam-
age the memory.
20. Operation switch
Press to turn the power on. The switch's
indicator lights. To turn the power off,
press again. See “Turning On the Power”.
21. {Start} key
Press to start copying, printing, scanning,
or sending.
22. {q} key
Press to set a selected item or an entered
numeric value.
23. Number keys
Press to enter numeric values.
24. {OK} key
Press to set a selected item or an entered
numeric value.
25. {Original} key (copier, scanner
and facsimile mode)
Press to select the most suitable scanning
method for the original. See “Original
Type Setting”, Copy Reference, “Select-
ing Original Type”, Scanner Reference,
and “Original Type”, Facsimile Reference.
26. {Escape} key
Press to cancel operation or return to the
previous display.
27. {Lighter} key, {Darker} key (copi-
er, scanner and facsimile mode)
Press to adjust the scanning density un-
der the copier, fax and scanner functions.
28. {Sort} key (copier mode)
Press to automatically sort printed cop-
ies. See “Sort”, Copy Reference.
29. {Duplex} key (copier mode, Type
2 only)
Press to make two-sided copies. See “Du-
plex (Type 2 only)”, Copy Reference.
30. {Combine/Series} key (copier
mode)
• Combine: combines and prints the
pages of a multiple-sheet original onto
a single-sheet. See “One-Sided Com-
bine” and “Two-Sided Combine
(Type 2 only)”, Copy Reference.
• Series: prints each page of a double-
page spread as a single-page copy.
31. {fOnline} key (printer mode)
Press to switch between on-line and off-
line modes.
32. mData In indicator (printer
mode)
Flashes when receiving a print job. See
Printer Reference.
33. Quick Dial keys
Press to enter letters and symbols. See
“Entering Text”. Press to select the regis-
tered destination at a single touch. See
Facsimile Reference and Scanner Reference.
To Next Page
Loading...
