Adjusting colors based on the selected color
Creates colors by adjusting the density of primary colors based on a chosen basic color.
1. Press [Edit / Color].
2. Press [Color], and then press [User Color].
3. Press [Program], and then select the number (01 15) for the color you want to register.
4. Select the color to be used as base color from the basic and user colors.
The density of primary colors for the selected color is displayed.
To select user color, press [User Color], and then select the color.
5. Select the color whose density is to be specified, and then specify the density in percentages
using [ ] or [ ].
Adjusting Color and Image Quality
105
To Next Page
Loading...
