Auto Reduce / Enlarge
With the Auto Reduce / Enlarge function, the machine automatically calculates the reproduction ratio
based on the sizes of the originals and the paper you have specified. The machine will rotate, enlarge, or
reduce the image of the originals to fit them to the paper.
• You cannot use the bypass tray with this function.
• If you select a reproduction ratio after pressing [Auto Reduce / Enlarge], [Auto Reduce / Enlarge] is
canceled and the image cannot be rotated automatically.
This is useful to copy different size originals to the same size paper.
If the orientation in which your original is placed is different from that of the paper you are copying onto,
the machine rotates the original image by 90 degrees and fits it on the copy paper (Rotate Copy).
1. Press [Original Settng].
2. Press [Original Size].
3. Specify the original size, and then press [OK].
4. Select original orientation.
5. Press [OK].
2. Basic Copying
56
To Next Page
Loading...
