Registering Frequently Used Functions for Printing Stored Documents from the
Document Server
You can store frequently used Document Server print job settings in the machine memory and recall them
for future use.
The settings you can store are as follows:
• The number of prints
• 2 Sided Copy, Booklet, Magazine
• Finishing (Sort, Stack, Staple)
• Cover/Slip Sheet (Front Cover, Front/Back Cover, Designate/Chapter, Slip Sheet)
• Edit / Stamp (Margin Adj., Stamp)
For details about how to store these settings, see “Registering Frequently Used Functions”.
• p.85 "Registering Frequently Used Functions"
Changing the Default Functions of the Document Server's Initial Display
You can configure the settings of the initial document print screen or the initial scan original screen.
The initial document print screen appears when [To Printing Screen] on the document selection screen is
pressed. The initial scan original screen appears when [Scan Original] on the document selection screen
is pressed.
The functions you can specify as the default functions of the initial screens are as follows:
• Initial document print screen
Finishing, Cover/Slip Sheet, Edit / Stamp, 2 Sided Copy, Booklet, Magazine, number of prints
• Initial scan original screen
Color mode, Paper Tray, Original Type, Density, Original Settng, Original Orientation, Edit / Color,
Duplex/Combine, Reduce / Enlarge
For details about how to configure the default functions displayed on the initial document print screen, see
“Changing the Default Functions of the Copy's Initial Display”.
To configure the default functions displayed on the initial scan original screen, press the [Program] key and
then press [Program].
• p.89 "Changing the Default Functions of the Copy's Initial Display"
5. Document Server
192
To Next Page
Loading...
Need help?
General
