1. Press [Original Settng].
2. Select [SADF], and then press [OK].
3. Place one page of an original, and then press the [Start] key.
4. When the machine instructs you to place another original, place the next page.
The second and subsequent pages will be fed automatically without pressing the [Start] key.
• When [Batch] is displayed instead of [SADF], specify the SADF mode under Switch to Batch in User
Tools. For details about Switch to Batch, see “Input / Output”.
• When the Sort, Combine or 1 Sided 2 Sided function has been set, press the [ ] key after all
originals have been scanned.
• In SADF mode, an original must be set within a specified time after the previous original has been fed.
You can adjust this time under SADF Auto Reset in User Tools. For details, see “Input / Output”.
• You cannot switch between 1-sided and 2-sided originals during copying.
• p.211 "Input / Output"
Specifying Original Sizes
Specify the size of the originals.
The size of originals can be specified by the following three methods:
• Using the paper tray settings
When [Use Paper Tray Settg] is selected, the machine scans the originals based on the size and
orientation of the paper loaded in the selected tray.
• Selecting regular sizes
The user selects the size of the originals from the regular sizes.
• Specifying custom sizes
The user specifies both the horizontal and vertical size of the originals.
1. Placing Originals
32
To Next Page
Loading...
