4. Press [Recall].
The registered size is displayed.
5. Press [OK] twice.
Copying onto OHP Transparencies or Thin Paper
When copying onto OHP transparencies or thin paper, select the type and size of paper.
• We recommend that you use specified OHP transparencies.
• Do not use color OHP transparencies that are coated with materials that might melt.
• OHP transparencies must be loaded face down in the tray.
• When copying onto OHP transparencies, remove copied sheets one by one.
1. Press [Bypass], and then press the [ ] key.
2. Press [Paper Type].
3. Select [OHP (Transparency)] or [Thin Paper], and then press [OK].
4. Specify the paper size.
5. Press [OK].
6. Place the originals, and then press the [Start] key.
Copying from the Bypass Tray
47
To Next Page
Loading...
