Adjust Color Image
This section describes the user tools in the Adjust Color Image menu under Copier/Document Server
Features.
Background Density of ADS (Full Color)
The background density is adjusted to skip the texture and copy. You can adjust the background
density up to five levels when in Full Color.
The default setting is the middle of five adjustment levels.
Color Sensitivity
You can adjust the color specified to convert in “Convert Color” and the color specified for “Erase
Color”, in five levels.
The default setting is the middle of five adjustment levels.
When the color width has been set to “Wider”, and the color to be deleted, for example is red, all
the colors that are close to magenta and orange are deleted. If it's set to “Narrower” the color red
will be deleted.
A.C.S. Sensitivity
This five-step setting determines the level of the standard used for discriminating between black &
white originals and full color originals when “Auto Color Select” is selected.
The default setting is the middle of five adjustment levels.
A.C.S. Priority
This setting determines the copy priority between “Black & White” and “Full Color” when “Auto Color
Select” is selected.
Default: [Full Color]
Adjust Color Image
213
To Next Page
Loading...
Need help?
General
