3. Press [Horizontal].
4. Enter the desired ratio with the number keys, and then press [ ].
5. Press [Vertical].
6. Enter the desired ratio with the number keys, and then press [ ].
7. Press [OK] twice.
• To change the value you entered, press the key you want to change, and then enter a new value.
Directional Size Magnification (inch)
Specify the horizontal and vertical lengths of the original and copy image.
Copies can be reduced or enlarged at different reproduction ratios horizontally and vertically.
1. Horizontal original size: A mm (inch)
2. Vertical original size: B mm (inch)
3. Horizontal copy size: a mm (inch)
4. Vertical copy size: b mm (inch)
Measure and specify the lengths of the original and copy by comparing “A” with “a” and “B” with “b”.
4. Advanced Copying
118
To Next Page
Loading...
