• Printing on special paper such as OHP transparencies and thin paper may be slower than printing on
plain paper.
• To prevent multiple sheets from being fed at once, fan paper before placing it on the tray.
• Load OHP transparencies one by one if they jam when loaded together.
Copying onto Thick Paper
When copying onto thick paper, select the type and size of paper.
1. Press [Bypass], and then press the [ ] key.
2. Press [Paper Type].
3. Select a paper weight from Thick Paper 1 to 4, and then press [OK].
Select [Thick Paper 1] when paper weight is between 106 g/m
2
(28 lb. Bond) and 130 g/m
2
(35
lb. Bond).
Select [Thick Paper 2] when paper weight is between 131 g/m
2
(35 lb. Bond) and 163 g/m
2
(90
lb. Index).
Select [Thick Paper 3] when paper weight is between 164 g/m
2
(90 lb. Index) and 220 g/m
2
(80
lb. Cover).
Select [Thick Paper 4] when paper weight is between 221 g/m
2
(80 lb. Cover) and 256 g/m
2
(140
lb. Index).
4. Specify the paper size.
5. Press [OK].
6. Place the originals, and then press the [Start] key.
• When copying onto Thick Paper 3 or Thick Paper 4, copy paper is output in the finisher shift tray or
internal tray 1, even if you specify a different tray.
• Printing on thick paper may be slower than printing on plain paper.
2. Basic Copying
48
To Next Page
Loading...
