6. Press [Auto Reduce / Enlarge].
7. Select the paper tray.
8. Place the originals, and then press the [Start] key.
• The machine selects reproduction ratios of between 25 and 400%. However, if the originals are
placed in the ADF, the maximum reproduction ratio is 200%. To copy originals at a reproduction
ratio above 200%, you must place them on the exposure glass.
• To copy A5 originals at 100%, select the tray that contains A5 , and then select [Auto Reduce /
Enlarge]. The machine rotates the original image by 90 degrees.
• For details about the original size you can select as the regular size, see “Sizes Selectable as Regular
Size Originals”.
• The Rotate Copy function is not available in combination with certain finishing settings.
• p.22 "Sizes Selectable as Regular Size Originals"
Reducing or Enlarging Originals
57
To Next Page
Loading...
