• The reproduction ratios you can specify are 25 400%. However, if the originals are placed in the
ADF, the maximum reproduction ratio is 200%. To copy originals at a reproduction ratio above 200%,
you must place them on the exposure glass.
• When entering a percentage ratio, you can specify any value in the permitted range, regardless of
original or copy paper size. However, depending on settings and other conditions, part of the image
may not be copied, or margins will appear on copies.
Specifying the ratio with [ ] and [ ]
Specify a ratio using [ ] and [ ].
1. Press [Reduce / Enlarge].
2. Press [Direct. Mag. %].
3. Press [[ ] [ ] keys].
4. Press [Horizontal].
4. Advanced Copying
116
To Next Page
Loading...
