Default for “Customize Function: Document Server Storage 1”: [2 Sided Orig. Top to Top]
Default for “Customize Function: Document Server Storage 2”: [1 sided Comb 2 orig]
Default for “Customize Function: Document Server Storage 3”: [1 sided Comb 4 orig]
Default for “Customize Function: Document Server Storage 4”: [1 sided Comb 8 orig]
Default for “Customize Function: Document Server Storage 5”: [Create Margin]
Default for “Customize Function: Document Server Storage 6”: [Off]
Bypass Tray Paper Misfeed Prevention
You can specify how the machine responds when the paper size selected on the control panel differs
from that loaded on the bypass tray.
If you select [On], the machine displays a message after copying the first page of the originals. Load
the correct size of paper on the bypass tray, and then press the [Start] key to copy from the first page
of the originals.
If you have selected [On] and want to copy on paper that is longer than 355.6 mm (14 inches) from
the bypass tray, you cannot specify the right tray as the output tray. Doing so will result in a misfeed.
Select a tray other than the right tray.
Default: [On]
6. Copier and Document Server Features
198
To Next Page
Loading...
