Output: Facsimile (facsimile)
Specify a tray to which documents are delivered.
The default setting is [Internal Tray 1].
Output: Printer (printer)
Specify a tray to which documents are delivered.
The default setting is [Internal Tray 1].
System Status/Job List Display Time
Specify how long to display the System Status and Job List display for.
The default setting is [On], “15” second (s).
By selecting [On], you can specify a display time between 10 and 999 seconds.
Key Repeat
You can enable or disable repetition of an operation if a key on the screen or control panel is pressed
continuously.
The default setting is [Normal].
• p.17 "Accessing User Tools"
Output Tray Settings (Type 1 and 2)
• You cannot interrupt the current stapling job even if a stapling job is specified by a different function.
• When the optional finisher is installed and stapling or shift-sorting is specified, the job will be delivered
to the finisher shift tray regardless of the output tray specified.
General Features
21
To Next Page
Loading...
Need help?
General
