4. Enter your login user name and password in the [Login User Name] and [Login Password]
boxes respectively, and then click [Login].
Consult your administrator if you require a login user name and password.
5. On the menu in the left frame, click [Configuration].
6. Under [Scanner], click [Initial Settings].
The [Initial Settings] page appears.
7. Set [WSD (Scanner)] to [On].
8. Click [OK].
• For details about displaying Web Image Monitor, see "Monitoring", Network and System Settings
Guide. For details about using Web Image Monitor, see Web Image Monitor Help.
Registering the machine to a client computer
Use the following procedure to register this machine to a client computer.
• You must log on as an Administrators group member to register the machine.
• The client computer cannot detect the machine if they are on different network segments or if the
Windows Vista [Network Search] setting is disabled. For details, see Windows Help.
1. On the [Start] menu, click [Network].
The [Network] window appears and the device search starts automatically.
2. Right-click the icon for this machine, and then click [Install].
The [User Account Control] dialog box appears.
3. Click [Continue].
• If the [Found New Hardware] dialog box appears, install the printer driver using the procedure shown
under "Installing the Printer Driver".
• When registration is complete, the scan profile is created automatically. To change the scan profile,
see "Changing a Scan Profile".
• p.90 "Changing a Scan Profile"
WSD Scanner Screen
This section explains the layout of the screen that allows you to send scan files using WSD.
3. Sending Scan Files Using WSD
80
To Next Page
Loading...
Need help?
General
