9. Press [OK].
10. Press [Exit].
11. Press the [User Tools/Counter] key.
Adding a Group to Another Group
This section describes how to add a group to another group.
1. Press the [User Tools/Counter] key.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [Address Book: Program / Change / Delete Group].
5. Check that [Program / Change] is selected.
6. Select the group that you want to put into another group.
Press the group key, or enter the registered number using the number keys.
You can search by the registered name, fax number, folder name, e-mail address, or IP-Fax
destination.
7. Press [Add to Group].
8. Select the group to which you want to add.
5. Registering Addresses and Users for Facsimile/Scanner Functions
296
To Next Page
Loading...
Need help?
General
