• A user code can be set after the printer driver installation. For information about user code, see the
printer driver Help.
• Auto Run may not work with certain operating system settings. In that case, launch “Setup.exe” on
the CD-ROM root directory.
Installing the PostScript 3 Printer Driver (Windows Vista)
• Installing this printer driver requires Administrators permission. Log on using an account that has
Administrators permission.
• You can install the printer driver from the CD-ROM provided with this machine or download it from
the supplier's Web site.
• If your operating system is Windows Vista x64, you must download the printer driver from the
manufacturer's Web site. Select this printer and the operating system you are using, and then
download it.
1. Quit all applications currently running.
2. Insert the CD-ROM into the CD-ROM drive.
The installer starts.
3. Select an interface language, and then click [OK].
The default interface language is English.
The printer driver with the selected language will be installed. The English printer driver is installed
when the following language is selected: Suomi, Magyar, Cestina, Polski, Portugues, Russian,
Catala, Turkce.
4. Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
5. Click [Local printer attached to this computer].
6. Select the port you want to use, and then click [Next >].
A dialog box for selecting the printer manufacturer and model name appears.
7. Select the name of the machine whose driver you want to install, and then click [Next >].
8. Click [Close] to close the [Printer Port] dialog box.
9. Click [Next >].
10. Change the printer name if you want, and then click [Next >].
11. Specify whether or not to print a test page, and then click [Finish].
The printer driver installation starts.
1. Windows Configuration
42
To Next Page
Loading...
Need help?
General
