Usable characters are ASCII 0x20-0x7e (32 bytes) other than “0”.
The default key length is 1024, and the character string is blank.
If you do not specify this parameter, an open key with the default value will be created.
Deleting open key for ssh/sftp communication
msh> ssh delkey
• If you do not specify a character string, the current setting is displayed.
• SSH can only be used with SFTP.
status
Use the “status” command to display the printer status.
view messages
msh> status
syslog
Use the “syslog” command to display the information stored in the printer's system log.
View message
msh> syslog
upnp
Use the “upnp” command to display and configure the universal plug and play.
Public URL display
msh> upnp url
Public URL configuration
msh> upnp url “string”
• Enter the URL string in the character string.
web
Use the “web” command to display and configure parameters on Web Image Monitor.
4. Monitoring and Configuring the Printer
194
To Next Page
Loading...
Need help?
General
