2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [Address Book Management].
5. Press [Program / Change].
6. Select the name whose code is to be deleted.
Press the name key, or enter the registered number using the number keys.
You can search by the registered name, fax number, folder name, e-mail address, or IP-Fax
destination.
7. Press [Auth. Info].
8. Press [Change] to delete the user code, and then press the [
] key.
9. Press [OK].
10. Press [Exit].
11. Press the [User Tools/Counter] key.
• To delete a name from the Address Book entirely, see "Registering Name".
• p.245 "Registering Names"
Authentication Information
253
To Next Page
Loading...
Need help?
General
