You can send a file to NetWare server by any of the following methods:
• Enter the destination path of the Netware server directly
• Specify the path by browsing to the destination on the Netware server
Entering the path of the NetWare server directly
You can enter the path of the NetWare server.
1. Press [Manual Entry].
2. Press [NCP].
3. Select the connection type.
Press [NDS] to specify the folder in the NDS tree.
Press [Bindery] to specify the folder on the NetWare Bindery server.
4. Press [Manual Entry] on the right side of the path field.
The soft keyboard appears.
5. Enter the path for the folder.
If you set the connection type to [NDS], the NDS tree name is "tree", the name of the context including
the volume is "context", the volume name is "volume", and the folder name is "folder", the path will
be \\tree\volume.context\folder".
2. Sending Scan Files to Folders
72
To Next Page
Loading...
Need help?
General
