10. Press the [Start] key.
If you are scanning batches, place the next originals.
11. Press [OK].
• Depending on the security setting, [Access Privileges] may appear instead of [User Name]. For
details about specifying [Access Privileges], consult the administrator.
• By pressing [Store to HDD + Send], you can simultaneously store scan files and send them. For
details, see "Simultaneous Storage and Sending by E-mail", "Simultaneous Storage and Sending
by Scan to Folder", and "Simultaneous Storage and Delivery".
• You cannot press [Store File] if:
• "PDF" is selected as the file type and security is applied
• High Compression PDF is selected as the file type
• You cannot specify [Store to HDD] if:
• a destination is specified
• [Preview] is selected
• To cancel scanning, press the [Clear/Stop] key.
• After an e-mail is sent, the file information fields will be automatically cleared. If you want to
preserve the information in these fields, contact your local dealer.
• p.97 "Specifying File Information for a Stored File"
• p.147 "Various Scan Settings"
• p.156 "Adjusting Image Density"
• p.157 "Setting of Original Feed Type"
• p.47 "Simultaneous Storage and Sending by E-mail"
• p.76 "Simultaneous Storage and Sending by Scan to Folder"
• p.136 "Simultaneous Storage and Delivery"
4. Storing Files Using the Scanner Function
96
To Next Page
Loading...
Need help?
General
