5
Names of Major Options
This section explains the names of the major options described in this manual.
Major options for this machine are referred to as follows:
• Roll Feeder Type 240A → Paper roll tray 1
• Roll Feeder Type 240B → Paper roll tray 2
• Paper Cassette Type 240 → Cut paper tray
• Table Type 240 → Table
• Folder FD6500A → Folding finisher
Terms
This section explains the meanings of terms used in this manual.
• Long length original/paper
Original/paper length longer than 1,189 mm, 46.8".
To Next Page
Loading...
