Ricoh Aficio MP W3600 - Using Web Printing Tool

Authentication and its Application
32
2
Using Web Printing Tool
Administrative settings for GL/2 & TIFF Filter can be changed, system logs can
be collected, etc. using Web Printing Tool.
A Start your Web browser.
B Enter “http://(machine's address)/webprint/” in the Web browser’s address
bar.
Top page of Web Printing Tool appears.
C Click the link to the administrator’s page in the header area on the upper-
right hand of the screen.
To change administrative settings (GL/2 & TIFF Initial Configuration) click .
To collect system logs click .
D Enter the administrator password, and then click [OK].
E Make setting as desired.
Note
❒ When logging in to Web Printing Tool the default password is set as “ad-
min”. To differentiate from the administrator password set in the machine,
use a password unique to Web Printing Tool for login.
❒ If the password authentication fails three times in a row, you will be re-
turned to the Web Printing Tool top page. To return to the login page
again, click the link in the header area on the upper-right hand of the
screen.
❒ The password can be changed in "Change the administrator password" un-
der the "Administrator Password" tab on the administrator settings (GL/2
& TIFF Initial Configuration) screen. Click [On] to activate the password
entry fields. The password must be 4 to 8 characters long.
❒ For details about Web Printing Tool, see the Web Printing Tool Help.