Clearing Misfeeds
68
6
Locating Jammed Paper
If a misfeed happens, remove the misfed paper or original by following the procedures
shown on the diagrams on the original cover, paper output exit cover, or paper roll tray.
A misfeed has occurred in the place corresponding to the letter displayed on the
control panel.
A Press the key of the section from where you want to remove the jammed paper.
B After each step is complete, press [Next]. To go back to the previous step,
press [Previous].
C When all jammed paper are removed, restore the machine to the original state.
Note
❒ More than one misfeed may be indicated. When this happens, check all the
areas indicated.
ATK009S
To Next Page
Loading...
