Edit
81
3
Edit
This section describes the user tools in the Edit menu under Copier / Document
Server Features.
Default settings are shown in bold type.
❖ Adjust Position
Specify the default setting for Print Position Adjustment.
The default setting is Bottom: 20 mm / Right: 20 mm (Metric version) / Bot-
tom: 0.8" / Right: 0.8" (Inch version)
• Metric version: 0 to 200 mm (1 mm increments)
• Inch version: 0 to 7.8" (0.1" increments)
❖ Erase Border Width
Specify the width of the border to be erased. The width is displayed over the
other copier screen images.
The default setting is 10 mm (Metric version) / 0.4" (Inch version).
❖ Erase Original Shadow in Combine
In Combine Copy or Booklet/Magazine Copy mode, you can specify whether
to erase a 3 mm, 0.1" bounding margin around all four edges of each original.
The default setting is On.
To Next Page
Loading...
