Registering Addresses and Users for Scanner Functions
126
6
Deleting a User Code
This section describes how to delete registered user code.
Important
❒ After clearing the user code, the counter is automatically cleared.
A Press [System Settings].
B Press [Administrator Tools].
C Press [Address Book Management].
D Check that [Program / Change] is selected.
E Select the name whose code is to be deleted.
Press the name key, or enter the registered number using the number keys.
If you press [Search], you can search by the registered name, user code, folder
name, or e-mail address.
F Press [Auth. Info].
G Press [Change] to delete the user code, and then press the {q} key.
H Press [OK].
I Press [Exit].
To Next Page
Loading...
