Authentication Information
125
6
D Check that [Program / Change] is selected.
E Select the user whose user code you want to change.
Press the name key, or enter the registered number using the number keys.
If you press [Search], you can search by the registered name, user code, folder
name, or e-mail address.
F Press [Auth. Info].
G Press [Change], and then enter the new user code using the number keys
H Press the {q} key.
I To change the available functions, press [Auth. Info] and then press [TNext]
twice.
J Press the key to select the functions to enable them.
Press the key to highlight it, and then the function is enabled. To cancel a se-
lection, press the highlighted key.
K Press [OK].
L Press [Exit].
M Press the {User Tools/Counter} key.
Note
❒ To change the name, key display and title, see “Changing a Registered
Name”.
Reference
p.120 “Changing a Registered Name”
To Next Page
Loading...
