Turning On the Power
37
1
Note
❒ Even if you press the operation switch, the operation switch indicator does
not go out, but blinks in the following cases:
• During communication with external equipment.
• When the hard disk is active.
Turning Off the Main Power
Turn off the main power as follows:
Important
❒ Do not turn off the main power switch when the operation switch indicator is
lit or blinking. Doing so may result in damage to the hard disk or memory.
❒ Make sure to turn off the main power switch before pulling out the power
plug. Not doing so may result in damage to the hard disk or memory.
A Make sure the operation switch indicator is not lit.
B Turn off the main power switch.
The main power indicator goes out.
Note
❒ To power down the folding finisher, turn off the main power switch of the
main unit first, and then turn off the folding finisher's main power switch.
To Next Page
Loading...
