Copier / Document Server Features
80
3
Inch version (Architecture)
• 25.0% (E → A)
• 33.3% (D → A, E → B)
• 50.0% (C → A, D → B, E → C)
• 66.7% (B → A, C → B, D → C, E → D)
• 133.3% (A → B, B → C, C → D, D → E)
• 200.0% (A → C, B → D, C → E)
• 266.7% (A → D, B → E)
• 400.0% (A → E)
❖ Reduce/Enlarge Ratio Priority
You can set the ratio that has priority when [Reduce / Enlarge] is pressed on the
copier screen.
The default setting is 70.7% (Metric version) / 64.7% (Inch version: Engineer-
ing) / 66.7% (Inch version: Architecture).
❖ Magnification Key Display
Specify which scale's reproduction ratios shown on the initial display.
The default setting is Engineering.
❖ User Auto Reduce/Enlarge:
Define a user auto reduce/enlarge ratio for each document size when copy-
ing with the User Auto Reduce / Enlarge feature.
[Off] determines whether to display a defined user auto reduce/enlarge ratio
on a copier screen.
Select one of the following paper sizes for a user auto reduce/enlarge ratio
defined for each document size:
• 34" × 44"
• 22" × 34"
• 17" × 22"
• 11" × 17"
•8
1
/
2
" × 11"
• 36" × 48"
• 24" × 36"
• 18" × 24"
• 12" × 18"
•9" × 12"
Reference
p.3 “Accessing User Tools”
"Supplementary Information", Copier / Document Server Reference
To Next Page
Loading...
