Edit
85
3
❖ Program / Delete Format
Store a format (background) image for use with Format Overlay. You can
store up to four formats. See "Program/Delete Overlay Format".
❖ Margin Adjustment Priority
Specify the default setting for the margin size.
You can set the top and bottom margin size.
The default setting is Top: 20 mm, Bottom: 20 mm (Metric version) / Top: 0.8",
Bottom: 0.8" (Inch version).
The size can be set as follows:
• Meric version: 0 to 200 mm (1 mm increments)
• Inch version: 0.0" to 7.9" (0.1" increments)
❖ Partial Copy Size
Specify the default settings of the start position (Y1) and the copy size (Y2).
The default setting is Y1: 0 mm, Y2: 210 mm (Metric version) / Y1: 0.0", Y2:
8.3" (Inch version).
The size can be set as follows:
• Metric version: Y1: 0 to 14790 mm (1 mm increments), Y2: 210 mm to 15000
mm (1 mm increments)
• Inch version: Y1: 0.0" to 582.3" (0.1" increments), Y2: 8.3" to 590.6" (0.1" in-
crements)
Reference
p.3 “Accessing User Tools”
p.93 “Program / Delete Overlay Format”
To Next Page
Loading...
