Registering Folders
153
6
Changing a NCP folder
This section describes how to change the registered NCP folder.
A Press [System Settings].
B Press [Administrator Tools].
C Press [Address Book Management].
D Check that [Program / Change] is selected.
E Select the user of the registered folder you want to change.
Press the name key, or enter the registered number using the number keys.
If you press [Search], you can search by the registered name, user code, folder
name, or e-mail address.
F Press [Folder].
G Select "Connection Type".
If you want to specify a folder in an NDS tree, press [NDS]. If you want to spec-
ify a folder on a NetWare server, press [Bindery].
H Specify the folder.
I Press [Connection Test] to check the path is set correctly.
J Press [Exit].
K Press the {User Tools/Counter} key.
Note
❒ To change the name, key display and title, see “Changing a Registered
Name”.
Reference
p.120 “Changing a Registered Name”
p.154 “Changing the registered NCP folder”
To Next Page
Loading...
