Registering a Protection Code
169
6
F Press [Protection].
G Press [Destination] or [Sender] under "Use Name as".
Both [Destination] and [Sender] can be selected at the same time.
H Press [Folder Destination] or [Sender] under "Protection Object".
Both [Folder Destination] and [Sender] can be selected at the same time.
I Press [Change] under "Protection Code".
J Enter a protection code using the number keys, and then press the {q} key.
K Press [OK].
L Press [Exit].
M Press the {User Tools/Counter} key.
Note
❒ Specify a protection code of up to eight digits. You can also specify “Pro-
tection” without specifying a protection code.
To Next Page
Loading...
