User Authentication
51
2
If you select [Entire], proceed to step
M
.
If you select [Simple (All)] or [Simple (Limitation)], proceed to step
I
.
Reference
For details, see p.71 “Printer Job Authentication Levels and Printer Job
Types”.
I Press [Simple (Limitation)]
J Press [Change].
K Specify the range in which [Simple (Limitation)] is applied to Printer Job Au-
thentication.
You can specify the IPv4 address range to which this setting is applied, and
whether or not to apply the setting to the parallel and USB interfaces.
L Press [Exit].
To Next Page
Loading...
