Authentication and its Application
56
2
Limitation
❒ Under LDAP authentication, you cannot specify access limits for groups reg-
istered in the LDAP Server.
❒ When using LDAP Authentication, you cannot use reference functions in
LDAP Search for servers using SSL.
❒ Enter the user’s login user name using up to 32 characters and login password
using up to 128 characters.
❒ Do not use double-byte Japanese, Traditional Chinese, Simplified Chinese, or
Hangul characters when entering the login user name or password. If you use
double-byte characters , you cannot authenticate using Web Image Monitor.
❒ If the machine has Printer Controller RW-3600 installed, it will not accept the
LDAP Authentication under the printer function. However, you can com-
plete LDAP Authentication when using the scanner function through the
Printer Controller RW-3600 and Printer Option Type W3600.
❒ For details about LDAP Authentication methods using Printer Controller
RW-3600, refer to the Printer Controller RW-3600 user manual.
Note
❒ Under LDAP Authentication, if “Anonymous Authentication” in the LDAP
server’s settings is not set to "Prohibit", users who do not have an LDAP serv-
er account might still be able to gain access.
❒ If the LDAP server is configured using Windows Active Directory, Anony-
mous Authentication might be available. If Windows Authentication is avail-
able, we recommend you use it.
❒ The first time an unregistered user accesses the machine after LDAP authen-
tication has been specified, the user is registered in the machine and can use
the functions available under [Available Functions] during LDAP Authentica-
tion.
❒ To limit the available functions for each user, register each user and corre-
sponding [Available Functions] setting in the address book, or specify [Available
Functions] for each registered user. The [Available Functions] setting becomes ef-
fective when the user accesses the machine subsequently.
To Next Page
Loading...
