Enhanced Network Security
150
5
C Press [Interface Settings].
D Press [Permit SSL/TLS Communication]
If the setting to be specified does not appear, press [TNext] to scroll down to
other settings.
E Select the encrypted communication mode.
Select [Ciphertext Only], [Ciphertext Priority], or [Ciphertext/Clear Text] as the en-
crypted communication mode.
F Press [OK].
G Press the {User Tools/Counter} key.
Note
❒ The SSL/TLS encrypted communication mode can also be specified using
Web Image Monitor. For details, see the Web Image Monitor Help.
To Next Page
Loading...
