Changing the Extended Security Functions
157
6
❖ Settings by SNMPv1 and v2
This can be specified by the network administrator. When the machine is ac-
cessed using the SNMPv1, v2 protocol, authentication cannot be performed,
allowing machine administrator settings such as the paper setting to be
changed. If you select [Prohibit], the setting can be viewed but not specified
with SNMPv1, v2.
•Prohibit
• Do not Prohibit
Note
❒ Default: Do not Prohibit
❖ Restrict Use of Simple Encryption
This can be specified by the network administrator.
For example, this setting is set to [On] and you want to edit the address book
in User Management Tool or Address Management Tool in SmartDevice-
Monitor for Admin, or you want to access the machine using DeskTopBinder
or the ScanRouter delivery software, enable SSL/TLS for encrypted commu-
nication. For details about specifying SSL/TLS, see p.149 “Setting the SSL /
TLS Encryption Mode”.
If you select [On], specify the encryption setting using the printer driver.
•On
•Off
Note
❒ Default: Off
Reference
For details, see the Printer driver Help.
For details, see the TWAIN driver Help.
To Next Page
Loading...
