Default: [Waterproof Paper 5]
• Waterproof Paper 1
• Waterproof Paper 2
• Waterproof Paper 3
• Waterproof Paper 4
• Waterproof Paper 5
Label Paper Setting
You can select the label paper setting mode.
• Tray 1 to 4, Bypass Tray
Default: [Label Paper 6]
• Label Paper 1
• Label Paper 2
• Label Paper 3
• Label Paper 4
• Label Paper 5
• Label Paper 6
Envelope Setting
You can select the envelope setting mode.
• Tray 1 to 4, Bypass Tray
Default: [Envelope 1]
• Envelope 1
• Envelope 2
• Envelope 3
• Envelope 4
Replacement Alert
Use this function to specify the timing to notify user when supplies need to be replaced. Settings can
be made separately for photo conductor unit, intermediate transfer unit, or fusing unit.
• Photoconductor Unit
Default: [Normal]
• Notify Sooner
• Normal
• Notify Later
• Intermediate Transfer Unit
Maintenance Menu
113
To Next Page
Loading...
