Duplex
Select whether or not to print on both sides of a sheet. When set to on, specify the binding method.
Default: [Off]
• Off
• Long Edge Bind
• Short Edge Bind
Rotate by 180 Degrees
Select whether or not to rotate image by 180 degrees when printing.
Default: [Off]
• On
• Off
Blank Page Print
Select whether or not to print blank pages.
Default: [On]
• On
• Off
Letterhead Setting
Specify whether or not to print with the letterhead printing mode.
Default: [Auto Detect]
• Off
Not printing with the letterhead printing mode.
• Auto Detect
Print with the letterhead printing mode when the letterhead printing mode is selected.
• On (Always)
Print with the letterhead printing mode regularly.
Tray Setting Priority
Specify whether the paper size and type settings that are applied are those specified using the
control panel, printer driver, or print command.
• Bypass Tray
Specify whether the paper size and type settings applied for bypass Tray are those specified
using the control panel, printer driver, or print command.
Default: [Driver/Command]
• Driver/Command
Print Settings Menu
131