When the source paper tray is specified for a print job, the paper settings specified
using the printer driver or by print command are applied, regardless of any settings
specified using the control panel.
• Machine Setting(s)
The paper settings specified on the machine's control panel are applied to all print
jobs. An error will occur if the paper settings specified using the printer driver or by
print command do not match those specified using the control panel.
• Any Size/Type
If the machine's trays do not contain paper matching the settings of the print job,
printing can proceed from the bypass tray with the job's settings applied.
• Any Custom Size/Type
If the machine's trays do not contain paper matching the settings of the print job but
custom paper was specified using the printer driver or by print command, printing can
proceed from the bypass tray with the job's settings applied.
• Tray 1
Specify whether the paper size and type settings applied for Tray 1 are those specified
using the control panel, printer driver, or print command.
Default: [Machine Setting(s)]
• Driver/Command
• Machine Setting(s)
• Tray 2
Specify whether the paper size and type settings applied for Tray 2 are those specified
using the control panel, printer driver, or print command.
Default: [Machine Setting(s)]
• Driver/Command
• Machine Setting(s)
• Tray 3
Specify whether the paper size and type settings applied for Tray 3 are those specified
using the control panel, printer driver, or print command.
Default: [Machine Setting(s)]
• Driver/Command
• Machine Setting(s)
• Tray 4
Specify whether the paper size and type settings applied for Tray 4 are those specified
using the control panel, printer driver, or print command.
Default: [Machine Setting(s)]
5. Making Printer Settings Using the Control Panel
132
To Next Page
Loading...
