Maintenance Table
SM Appendix 2-1 C274
Appendix:
Maintenance
Tables
2. APPENDIX: MAINTENANCE TABLES
2.1 MAINTENANCE TABLE
The following items should be maintained periodically. There are two sets of intervals - one
based on time and the other based on print count. For maintenance items with entries in
both of them, use whichever comes first.
Symbol key: C: Clean, R: Replace, L: Lubricate, A: Adjust
Turn off the main power switch and unplug the machine before performing any
procedure in this section.
Time Print Counter
Internal
Item
6M 1Y 2Y 5Y 150K 300K 600K 1.2M 3M
EM Note
Scanner/Optics
CIS C C C C C Dry Cloth
1st Feed
Roller
C C C C C C
Damp
Cloth
2nd Feed
Roller
C C C C C C
Damp
Cloth
Shading
Plate (White
Plate)
C C C C
Dry Cloth,
Expected
life is 10k
masters.
Master Feed
Thermal
Head
C C C C C Alcohol
Platen Roller C C Alcohol
Master End C C Dry Cloth
To Next Page
Loading...
