Image Adjustment
SM 4-9 C274
Replacement
and
Adjustment
DIPSW101-5 DIPSW101-6 DIPSW101-7 DIPSW101-8 Difference Difference
ON ON OFF OFF +6dot +0.508mm
OFF ON OFF OFF +4dot +0.339mm
ON OFF OFF OFF +2dot +0.169mm
1 dot = 0.085 mm
4.3.6 DIPSW102 NO.1 TO 3 – THERMAL HEAD ENERGY
CONTROL
The default is -7%. This means that during printing mode, the thermal head energy is 93 %
of the maximum power.
This can help to increase or decrease the image density. However, do not use this SP
under normal circumstances.
DIPSW102-1 DIPSW102-2 DIPSW102-3 Settings
OFF OFF OFF -7% (Standard)
OFF ON OFF -5%
OFF OFF ON -3%
OFF ON ON 0
ON OFF OFF -10%
ON ON OFF -15%
ON OFF ON -20%
4.3.7 DIPSW103 NO.1 TO 4 – SCANNING SPEED ADJUSTMENT
Purpose: To adjust the sub-scan magnification for scanning by changing the speed of the
scanner motor.
Inputting a positive value stretches the image on the master. Inputting a negative value
shrinks it.
Adjustment standard: Within 100 ± 0.5 %
To Next Page
Loading...
