Optional Installation
SM 2-13 C274
Installation
and from drying.
5. Keep the removed drum unit in the drum case.
6. Install the drum unit.
7. Remove the ink cartridge cap.
8. Insert the ink cartridge in the ink holder.
2.3.2 PRINTER UNIT VC-20 AND INTERFACE BOARD TYPE 20
The Interface board type 20 must be installed before you install the Printer Unit
VC-20.
Accessory Check (Interface Board Type 20)
Check the quantity and condition of the accessories in the box against the following list:
Description Q'ty
1. Interface Board 1
2. Interface Cable 1
3. Bracket 2
4. Screw M3x6 6
Accessory Check (Printer Unit VC-20)
Check the quantity and condition of the accessories in the box against the following list:
To Next Page
Loading...
