Test Mode
C274 5-6 SM Appendix
5.3 TEST MODE
5.3.1 SP TABLE
No. Name Function
3-1 Firmware Suffix
Information
( Explanation Below)
3-4 All Indicators ON Turns on all the indicators on the operation panel by
pressing the master making key.
3-5 Test Pattern Print Print the thermal head test pattern by pressing the
master making key.
3-6 Ink Detection Specifies whether ink detection is done.
0: OFF
1: ON (Default)
The setting value returns to default value in power
switch off.
SP3-1: Firmware Suffix Information
This model has no LCD, so the suffix is displayed as shown below instead of in Latin
letters.
The letters “i”, “o” and “u” are always skipped.
To Next Page
Loading...
