Drum
SM 4-31 C274
Replacement
and
Adjustment
4.9 DRUM
4.9.1 PREPARATION
Before attempting any of the procedures in this section, wipe off the ink around the ink roller.
To do this, set SP3-6 (ink detection) to off, and feed paper until ink ends. The setting value
returns to the default value when power is switched off/on.
4.9.2 CLOTH SCREEN
Remove the drum
1. Remove the drum upper bracket ( x 4).
2. Release the stopper [A], then rotate the drum until the master clamper faces top.
3. Remove the cloth screen [B] (x 4).
To Next Page
Loading...
