Drum
C274 4-36 SM
holes, to allow for the removal of the slack.)
Position the springs [B] and [C] (one each at the front and rear) as shown when
reinstalling the drum master clamper [D].
Do not scratch the cloth screen or metal screen.
4.9.4 INK PUMP UNIT
Remove the drum
Cloth screen ( Cloth Screen)
Clamper / Metal screen ( Clamper / Metal Screen)
[A]: Ink pump unit ( x 1, x 2)
4.9.5 INK ROLLER UNIT / INK ROLLER ONE WAY CLUTCH
Wipe off the ink around the ink roller beforehand (use SP3-6).
To Next Page
Loading...
