Adjustment Mode
SM Appendix 5-7 C274
Appendix:
SP Mode
Tables
5.4 ADJUSTMENT MODE
5.4.1 SP TABLE
No. Name Function
6-40 Ink Detection Adjustment ( Replacement and Adjustment – Drum - Ink
Detection Adjustment)
6-41 Master End Sensor
Adjustment
( Replacement and Adjustment – Master Feed -
Master End Sensor Adjustment)
6-42 Image Adjustment Pattern
Print
( Explanation below)
SP6-42: Image Adjustment Pattern Print
This test pattern is used for master feeding speed adjustment.
Master Feeding Speed Adjustment: ( Replacement and Adjustment – Image
Adjustment - DIPSW103 No.5 to 8 – Master Feeding Speed Adjustment)
This test pattern is generated in the MPU, and does not use the scanner unit. So, this
pattern can also be used to determine whether an image problem is caused by the scanner
or the thermal head.
If there is an image problem during copying but the test print is OK, the problem could be in
the scanner unit.
The print paper should be B4 or LG size when using this test pattern.
To Previous Page
Loading...
