Image Adjustment
C274 4-10 SM
1. Make a copy at 90 cpm (speed "Fast")
2. Compare the image on the print with that on the original.
3. Make sure that the difference of the sub-scan magnification is within the standard.
4. If it is out of standard, then adjust DIPSW103-1 to 103-4.
The image position on a trial print, which is automatically made after making a
master, tends to vary. Do not use the trial print when making adjustments.
DIPSW103-1 DIPSW103-2 DIPSW103-3 DIPSW103-4 Difference
ON ON ON ON +1.4%
OFF ON ON ON +1.2%
ON OFF ON ON +1.0%
OFF OFF ON ON +0.8%
ON ON OFF ON +0.6%
OFF ON OFF ON +0.4%
ON OFF OFF ON +0.2%
OFF OFF OFF ON 0
OFF OFF OFF OFF 0
ON ON ON OFF -1.4%
OFF ON ON OFF -1.2%
ON OFF ON OFF -1.0%
OFF OFF ON OFF -0.8%
ON ON OFF OFF -0.6%
ON OFF OFF OFF -0.4%
OFF ON OFF OFF -0.2%
To Next Page
Loading...
