Mechanism Overview
SM 1-5 C274
Product
Information
Switches
No. Component Function
7
Right Side Cover Set
Switch
Checks if the right side cover is closed.
14 Door Safety Switch Checks whether the front door is properly closed.
Solenoids
No. Component Function
12
Front Pressure Release
Solenoid
Releases the press roller to apply printing pressure.
30
Rear Pressure Release
Solenoid
Releases the press roller to apply printing pressure.
Counters
No. Component Function
20 Master Counter Keeps track of the total number of masters made.
21 Paper Counter Keeps track of the total number of copies.
Sensors
No. Component Function
3 Cutter HP Sensor Detects when the cutter is at the home position.
8 Master Set Cover Sensor Checks if the master set cover is properly set.
9
Master End Sensor Detects when the master making unit runs out of
master roll.
To Next Page
Loading...
