Paper Feed
SM 4-25 C274
Replacement
and
Adjustment
[C]: Standard position (35 to 81.5 g/m
2
, 9.3 to 21.6 lb.)
[D]: Thick paper position (81.6 to 127.9 g/m
2
, 21.7 to 34.0 lb.)
The user can change the feed roller pressure by changing the position of the pressure
adjustment lever [C].
If paper feed jams frequently occur, the lever should be moved to adjust the pressure.
If non-feed or multi-sheet feed problems still occur, the paper separation pressure can
also be adjusted using the separation pressure slider [A].
The default position of the slider [A] is position 3.
By loosening then moving the screws [B] up or down, the spring [E], which applies
pressure to the friction pad block [F], moves up or down.
The default position of the screw [B] is at the lowest position.
To Next Page
Loading...
