Accessing User Tools
This section describes how to access User Tools menu.
User Tools allow you to change or set defaults.
• Operations for system settings differ from normal operations. Always quit User Tools when you have
finished.
• Any changes you make with User Tools remain in effect even if the main power switch or operation
switch is turned off, or the [Energy Saver] or [Clear Modes] key is pressed.
Changing Default Settings
This section describes how to change the settings of User Tools.
• If Administrator Authentication Management is specified, contact your administrator.
1. Press the [User Tools/Counter] key.
2. Press [System Settings].
3. Select the user tool you want to change.
4. Change settings by following instructions on the display, and then press [OK].
• To cancel changes made to settings and return to the initial display, press the [User Tools/Counter]
key.
• For details about specifying System Settings, see "System Settings".
• For details about specifying other settings such as adjusting color registration, adjusting gradation,
setting plain paper, changing the language, checking enquiry and counter, see "Other User Tools",
About This Machine.
17
To Next Page
Loading...
Need help?
General
