2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [Address Book Management].
5. Check that [Program / Change] is selected.
6. Select the name whose fax destination you want to register.
Press the name key, or enter the registered number using the number keys.
7. Press [Fax Dest.].
8. Press [Change] under "Fax Destination".
9. Enter the fax number using the number keys, and then press [OK].
10. Specify optional settings such as "SUB Code", "SEP Code", and "International TX Mode".
11. Press [OK].
12. Press [Exit].
13. Press the [User Tools/Counter] key.
• To register the name, see "Registering Names".
• When a group is registered, you can also add this fax destination to the group. For details about
registering groups, see "Registering Names to a Group".
5. Registering Addresses and Users for Facsimile/Scanner Functions
260
To Next Page
Loading...
Need help?
General
